Automatic speed control position control

h/p/cosmos®

Automatic SpeedControl Software for LED bars on the h/p/cosmos treadmills.

 

article number: cos100699_LED

manufacturer: Microgate, Italy

 

- Software for automatic position detection of the subject through LED sensor.

   CAUTION! The LED sensor bars and prices are not included in this article!

   The LED sensor bars have to be ordered additionally with following numbers:

sports:

   cos102056 for Microgate Optojump next 1 m basic bar for extension

   cos102055 for Microgate Optojump next per 1 additional meter

medical:

   cos102067 for Microgate Optogait 1 m basic bar for extension

   cos102066 for Microgate Optogait next per 1 additional meter

 

Control area, zero area and acceleration index is adjustable. The speed of the running machine is controlled via pre-programed criteria and if the athlete changes the position on the running area. If the subjects moves to the front, the machine speeds up automatically. In the center of the running deck there is a "no control zone". If the subject slows down, the machines slows down automatically.

Operation of automatic speed control only with a fall prevention system and harness with chest belt for safety reasons. 

 

Attention: Control only works via coscom v3 interface protocol. A minimum length of 2.5 meters is recommended for the running surface. Due to the very individual reaction of subjects to automatic speed changes there may be a conflict between the desires of safety of the subject and the automatic speed control function. In other words, subjects try to exercise at the front part of the running deck for safety reasons, but then the speed control may speed up due to it's programmed function. So this function is not suitable for all subjects and depends very much on the individual needs and requirements.

 

It is forbidden to use the system for a medical application. If the automatic speed control is used for running decks shorter that 2.5 meters, then the application can be a different one: Then the goal may be that the subject is training his reaction capabilities based on the software changing the speed.