robowalk® expander front 150/50

h/p/cosmos®

Included:

1x cos101051-XS leg cuff shank, size XS (1 pair: left / right) 

1x cos101050-M leg cuff thigh, size M (1 pair: left / right)

 

The h/p/cosmos robowalk is a rubber cable pull system for h/p/cosmos treadmills. The patient's legs are attached to the rubber cable pulls via cuffs. These give motion support or resistance during gait motion.

Especially the motion support that is given by the rubber cable pulls / expanders is a valuable help for patient and therapist to carry out the exercises longer and more physiologic and thereby to get better training results. By the vertical or horizontal adjustment respectively of the angle of action of the support / resistance motion correction is possible. Vertical and horizontal adjustment is very fast and simple. Scales give reproducibility of the adjustments. The patented tension adjustment module consists of continuously variable rubber cable pulls with scales for load display.

 

Examples of use:

Motion support, mobilization, locomotion, gait training and gait correction for orthopaedic or neurological problems, coordination and functional training, strength and endurance training.

 

robowalk …. the "servo steering" in locomotion therapy.

Front system for installation on h/p/cosmos 150/50 LC pluto

The treadmill, accessories and the rear system have to be ordered separately! Also the h/p/cosmos arm support and the reverse belt rotation are strongly recommended as useful system configuration. Compatibility to other h/p/cosmos treadmill models on request. When ordering please specify the serial number of the treadmill. The system is not compatible to treadmills from other manufacturers.