Climate Run at -39.5°C and +48.4°C at the terraXcube
In February 2020 Franz Harrer (President & CEO of h/p/cosmos)...
The PBAES h/p/cosmos inflatable modules are the World’s first bespoke simulated altitude training inflatable modules, designed specifically for h/p/cosmos treadmills. The distinctive PBAES design follows the sleek contours of the h/p/cosmos safety arch at the front of the treadmill, whilst allowing for the mandatory safety zones around the machine.
The inflatable modules are available in three sizes: mercury, quasar/pulsar and venus/saturn and cater up to the h/p/cosmos saturn 300/125r machines.
The PBAES h/p/cosmos inflatable’s German-welded design uses three one-way valves and clever features to make the inflatable easy to inflate and place into position over the h/p/cosmos treadmill.
Special Features:
Inflatable Module | Dimensions (L x W x H in cm) |
Volume | Recommended PBAES System |
Max. No of Athletes |
---|---|---|---|---|
mercury | 475 x 200 x 265 | 21 m³ | SS600 | 1 |
quasar / pulsar | 510 x 200 x 275 | 23 m³ | SS600 | 1 |
venus / saturn | 600 x 300 x 325 | 48 m³ | SS600 x 2 | 1 |
The PBAES Summit Series 600 Hypoxic Air Generator creates a convenient hypoxic space for up to three athletes to train in, at any one time. The system is capable of supplying hypoxic air to a range of different shaped inflatable modules or small rooms, allowing sport specific training to take place within a hypoxic environment. The system also means athletes can train within a simulated altitude environment, allowing the athlete to acquire those benefits associated with altitude training, without costly, lengthy and disruptive overseas travel.
The controller display system located within the inflatable/room, allows users to not only remote start and stop the system but also allows users to see the achieved altitude (m), oxygen purity (%) and temperature (ºC).
In short, the Summit Series 600 unit generates hypoxic air that is safe, reliable and fully adjustable up to an altitude of 4,000m (12.5% Oxygen).* The system is easily manoeuvrable, so that it can be easily stored when not in use.
Special Features:
System Specifications | |
---|---|
Altitute Range (m): | 0m - 4,000m* |
Max. Recommended Volume: | 24 m³ |
Weight (kg) | 180 kg |
Noise (dB(A)): | ≤60 |
*Typical operating range.
h/p/cosmos treadmills for climate chambers are available on request (for all sizes as an option at extra charge for climatic conditions from -35°C ... +55°C and 20% ... 95% humidity). For the use in climate chambers, we recommend a treadmill setup with external UserTerminal.
All electric and electronic equipment and all machines and material put into climate chambers must meet special demands for environmental conditions, such as high humidity, tough temperature ranges, wind, different air pressure, altitute simulations, etc.
Standard equipment has great limitations for environmental conditions. Read the details of allowed environental conditions of the respective devices you want to operate in the climate chamber and compare with the artifiically planned enviromental conditions for the chamber. It is even dangerous and it is forbidden to put standard electric devices under conditions of very high humidity or very high temperature ranges, since not only malfunctions but also accidents may occur.
Therefore for this application h/p/cosmos has designed special running machines, where the main electric components (frequency inverter, power supply, potential isolation transformer, fuses, etc.) are in the UserTerminal outside the chamber and the remaining components in the treadmill are special versions working under such tough conditions.
Also the frame and most metal parts need special treatment for better protection against rust and corrosion.
Zwischensumme netto | 7,50 € |
MwSt. 19% | 1,43 € |
Gesamtbetrag (brutto inkl. MwSt.) | 8,93 € |
In February 2020 Franz Harrer (President & CEO of h/p/cosmos)...